TP-Link Easy Smart Switch - Backup and Restore Switch Configuration

User Guide 14
Managing System Backing up and Restoring the Switch
6
Backing up and Restoring the Switch
With backup and restore, you can:
■ Save the current configuration.
■ Restore to the previous configuration.
6.1 Saving the Current Configuration
Choose the menu System > System Tools > Backup and Restore to load the following
page. In the Config Backup section, click Backup Config to save the configuration file to
your PC.
Figure 6-1 Backing Up the Configuration
Note:
It will take several minutes to save the configuration file. Wait without any operation.