EasyManuals Logo

TP-Link Easy Smart Switch User Manual

TP-Link Easy Smart Switch
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
User Guide 18
Managing System Resetting the Switch
8
Resetting the Switch
Choose the menu System > System Tools > System Reset to load the following page.
Figure 8-1 Resetting the Switch
Follow these steps to reset the switch.
1) Click Reset, and the following page will pop up.
Figure 8-2 Being Sure to Reset the Switch
2) Click OK to reset the switch.
Note:
After the switch is reset, it will reboot automatically.
It will take several minutes to reboot the switch. Wait without any operation while the switch
reboots.
To avoid any damage, do not power down the switch during the reset.
After the switch is reset, all the settings will be restored to the default.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Easy Smart Switch and is the answer not in the manual?

TP-Link Easy Smart Switch Specifications

General IconGeneral
Cable DiagnosticsYes
Power Input100-240VAC, 50/60Hz
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-40°C to 70°C (-40°F to 158°F)
ModelEasy Smart Switch
Port TypeRJ45
Speed10/100/1000Mbps
MAC Address Table8K
Jumbo Frame9KB
QoS4 queues per port, priority-based QoS
IGMP SnoopingV1/V2/V3 Snooping
Port MirroringYes
ManagementWeb-based GUI
Standards and ProtocolsIEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1p, IEEE 802.1Q
Operating Humidity10% to 90% non-condensing
Storage Humidity5% to 90% non-condensing

Related product manuals