TP-Link Easy Smart Switch User Manual

Configuring Basic QoS ................................................................................................................................................... 62
Configuring QoS in Port Based Mode .........................................................................................................................................63
Configuring QoS in 802.1P Based Mode ..................................................................................................................................64
Configuring QoS in DSCP/802.1P Based Mode ...................................................................................................................64
Configuring Bandwidth Control ................................................................................................................................... 65
Configuring Storm Control ............................................................................................................................................ 67
Configuration Example for Basic QoS....................................................................................................................... 69
Network Requirements ........................................................................................................................................................................69
Configuration Scheme ........................................................................................................................................................................69
Configuration Steps ..............................................................................................................................................................................70
Appendix: Default Parameters ..................................................................................................................................... 72
Configuring PoE
(Only for Certain Devices)
Overview .............................................................................................................................................................................. 74
Configuring PoE................................................................................................................................................................. 75
Configuring PoE Auto Recovery ................................................................................................................................. 77
Appendix: Default Parameters ..................................................................................................................................... 79

TP-Link Easy Smart Switch Specifications

General

Cable Diagnostics	Yes
Power Input	100-240VAC, 50/60Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Model	Easy Smart Switch
Port Type	RJ45
Speed	10/100/1000Mbps
MAC Address Table	8K
Jumbo Frame	9KB
QoS	4 queues per port, priority-based QoS
IGMP Snooping	V1/V2/V3 Snooping
Port Mirroring	Yes
Management	Web-based GUI
Standards and Protocols	IEEE 802.3, 802.3u, 802.3ab, 802.3x, 802.1p, IEEE 802.1Q
Operating Humidity	10% to 90% non-condensing
Storage Humidity	5% to 90% non-condensing