18
Chapter 4
Set Up Internet Connection
4. Go to Settings or Advanced > Operation Mode, select Range Extender and click Save.
Log in to the router via http://tplinkwifi.net after the router reboots.
5. Configure the basic settings of the wireless network.
• Method 1: Use Quick Setup wizard
Go to Quick Setup to connect to the host network and specify your extended
wireless network name(SSID).
• Method 2: Manually configure the network connection
¾ To connect to the host network:
1 ) Go to Settings > Wireless > Connect to Network, select the wireless band
(2.4GHz or 5GHz) you want to connect to.
2 ) Make sure the Enable check box of Wireless Network is selected, and then click
Scan to detect all available wireless networks.
Tips:
1. You can also enter the SSID and MAC address of the host network in the corresponding fields and select the
security settings of the host network.
2. You can connect to both 2.4GHz and 5GHz wireless networks for a dual-band router, here we use the 2.4GHz
network as an example.
3 ) Select the wireless network you want to connect to by clicking the connect
icon in the Connect column. Once the host network is selected, the SSID and
security settings of that network will be automatically filled in.
To Next Page
Loading...
Need help?
General
