34
Chapter 7
Network Security
3. Bind your device(s) according to your needs.
To bind the connected device(s):
1 ) Select the device(s) to be bound in the ARP List.
2 ) Click Bind to add to the Binding List.
To bind the unconnected device:
1 ) Click Add in the Binding List section.
2 ) Enter the MAC address and IP address that you want to
bind.
3 ) Select the Enable This Entry check box to enable the
entry and click Save.
Enjoy the internet without worrying about ARP spoofing and
ARP attacks.
Done!
To Next Page
Loading...
Need help?
General
