105
Any Configuration Mode
Example
Display the system information:
TP-LINK# show system-info
show ip address
Description
The show ip address command is used to display MAC Address, IP Address,
Subnet Mask and Default Gateway of the system, whether the DHCP Client
function is enabled or not and some other information.
Syntax
show ip address
Command Mode
Any Configuration Mode
Example
Display the IP Address of the system
TP-LINK# show ip address
show system-time
Description
The show system-time command is used to display the time information of the
switch.
Syntax
show system-time
Command Mode
Any Configuration Mode
Example
Display the time information of the switch
TP-LINK# show system-time
To Next Page
Loading...
Need help?
General