139
acl holiday
Description
The acl holiday command is used to create holiday in Holiday Mode in the acl
time-segment command. To delete the corresponding holiday, please use no
acl holiday command.
Syntax
acl holiday {name} {start-date} {end-date}
no acl holiday {name}
Parameter
name —— The holiday name, ranging from 1 to 16 characters.
start-date —— The start date of the holiday, in the format of MM/DD, for
instance, 05/01.
end-date —— The end date of the holiday, in the format of MM/DD, for
instance, 05/03.
Command Mode
Global Configuration Mode
Example
Define National Day, configuring the start date as October 1st, and the end date
as October 3rd:
TP-LINK(config)# acl holiday NationalDay 10/01 10/03
acl create
Description
The acl create command is used to create ACL. To delete the corresponding
ACL, please use no acl create command.
Syntax
acl create id
no acl create id
Parameter
id —— ACL ID, ranging from 0 to 299. 0-99 must be MAC ACL, 100-199 must
be Standard-IP ACL, and 200-299 must be Extend-IP ACL.
Command Mode
Global Configuration Mode
To Next Page
Loading...
Need help?
General