124
same time.
3. Whether the mirroring port and mirrored ports are in the same VLAN or not
is not demanded strictly.
4. The mirroring port and mirrored ports cannot be link-aggregation member.
mirror remove group
Description
The mirror remove group command is used to remove mirror group.
Syntax
mirror remove group [group-num]
Parameter
group-num
——
The group number of mirrior group.
Command Mode
Global Configuration Mode
Example
Remove mirror group 1:
TP-LINK(config)# mirror remove group 1
mirror remove mirrored
Description
The mirror remove mirrored command is used to remove the mirrored port
from the mirror group.
Syntax
mirror remove mirrored [mirrored port] [group-num]
Parameter
Mirrored port
——
The port to be monitored.
group-num
——
The group number of mirrior group.
Command Mode
Global Configuration Mode
Example
Remove mirrored port 1,2-4 from mirror group 1:
TP-LINK(config)# mirror remove mirrored 1,2-4 1
To Next Page
Loading...
