TP-Link JetStream TL-SG3424P Cli Reference Guide

130
Interface Configuration Mode
Example
Enable the PoE priority as low for port 2.:
TP-LINK(config)# interface ethernet 2
TP-LINK(config-if)# power inline priority low
power inline consumption (interface configuration)
Description
The power inline consumption (interface configuration) command is used to
configure the power limit the port can spupply.
Syntax
power inline consumption {power limit}
Parameter
power limit —— the max power the corresponding port can supply. The value
ranges from 1 to 300. Power limit= this value * 0.1W. For instance, if you want to
configure the max power as 5W, you should enter 50.
Command Mode
Interface Configuration Mode
Example
Configrue the power limit as 5W for port 2.:
TP-LINK(config)# interface ethernet 2
TP-LINK(config-if)# power inline consumption 50
power inline time-segment
Description
The power inline time-segment command is used to configure the time range
for the PoE port to supply power. no power inline time-segment is used to
cancel the selected time-range.
Syntax
power inline time-segment {name}
no power inline time-segment
Parameter

TP-Link JetStream TL-SG3424P Specifications

General

Brand	TP-Link
Model	JetStream TL-SG3424P
Category	Switch
Language	English