170
Syntax
show igmp-snooping multi-ip-list
Command Mode
Any Configuration Mode
Example
Display the Multicast IP table:
TP-LINK> show igmp-snooping multi-ip-list
show igmp-snooping filter-ip-addr
Description
The show igmp-snooping filter-ip-addr command is used to display the
Multicast Filter IP-Range table.
Syntax
show igmp-snooping filter-ip-addr
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter IP-Range table:
TP-LINK(config)# show igmp-snooping filter-ip-addr
show igmp-snooping port-filter
Description
The show igmp-snooping port-filter command is used to display the
configuration of Multicast Port Filter.
Syntax
show igmp-snooping port-filter [port-num]
Parameter
port-num —— The port selected to display the configuration of Multicast Filter.
By default, the configuration of all ports is displayed.
Command Mode
Any Configuration Mode
Example
Display the Multicast Filter configuration of port 5:
To Next Page
Loading...
