TP-Link JetStream TL-SG3424P - Show Power Inline; Show Power Inline Configuration

134
Define National Day, configuring the start date as October 1st, and the end date
as October 3rd:
TP-LINK(config)# power holiday NationalDay 10/01 10/03
show power inline
Description
The show power inline command is used to display the PoE information of the
system.
Syntax
show power inline
Command Mode
Any Configuration Mode
Example
Display the PoE information of the system:
TP-LINK> show power inline
show power inline configuration
Description
The show power inline configuration command is used to display the PoE
configuration of the certain port.
Syntax
show power inline configuration [ethernet port]
Parameter
port —— The port selected to display the PoE configuration, ranging from 1 to
24.
Command Mode
Any Configuration Mode
Example
Display the PoE configuration of all ports:
TP-LINK> show power inline configruaton