TP-Link JetStream TL-SG3424P Cli Reference Guide

76
TP-LINK(config)# radius accounting secondary-ip 10.20.1.101
radius accounting port
Description
The radius accounting port command is used to set the UDP port of
accounting server(s). To restore to the default value, please use no radius
accounting port.
Syntax
radius accounting port port-num
no radius accounting port
Parameter
port-num ——The UDP port of accounting server(s) ranging from 1 to 65535.
The default port is 1813.
Command Mode
Global Configuration Mode
Example
Set the UDP port of accounting server(s) as 1816:
TP-LINK(config)# radius accounting port 1816
radius accounting key
Description
The radius accounting key command is used to configure the shared
password for the switch and the accounting servers to exchange messages.To
clear the shared password for the switch and the accounting servers, please
use no radius accounting key command.
Syntax
radius accounting key key-string
no radius accounting key
Parameter
key-string ——The shared password for the switch and the accounting servers
to exchange messages which contains 15 characters at most.

TP-Link JetStream TL-SG3424P Specifications

General

Brand	TP-Link
Model	JetStream TL-SG3424P
Category	Switch
Language	English