TP-Link JetStream TL-SG3424P Cli Reference Guide

58
show dhcp-snooping interface
Description
The show dhcp-snooping interface command is used to display the interface
configuration of DHCP Snooping.
Syntax
show dhcp snooping interface [ethernet port-num]
Parameter
port-num ——The number of the switch port. By default, it will display the
configuration of all the ports.
Command Mode
Any Configuration Mode
Example
Display the interface configuration of all the ports:
TP-LINK(config)# show dhcp-snooping interface

TP-Link JetStream TL-SG3424P Specifications

General

Brand	TP-Link
Model	JetStream TL-SG3424P
Category	Switch
Language	English