TP-Link JetStream TL-SG3424P Cli Reference Guide

12
Chapter 2 User Interface
enable
Description
The enable command is used to access Privileged EXEC Mode from User
EXEC Mode.
Syntax
enable
Command Mode
User EXEC Mode
Example
If you have set the password to access Privileged EXEC Mode from User EXEC
Mode:
TP-LINK>enable
Enter password：
TP-LINK#
enable password
Description
The enable password command is used to set the password for users to
access Privileged EXEC Mode from User EXEC Mode. To return to the default
configuration, please use no enable password command.
Syntax
enable password password
no enable password
Parameter
password —— super password ， which contains 16 characters at most,
composing digits, English letters and underdashes only. By default, it is empty.
Command Mode
Global Configuration Mode
Example
Set the super password as admin to access Privileged EXEC Mode from User
EXEC Mode:
TP-LINK(config)# enable password admin

TP-Link JetStream TL-SG3424P Specifications

General

Brand	TP-Link
Model	JetStream TL-SG3424P
Category	Switch
Language	English