137
Report Message
Suppression:
Enable or disable Report Message Suppression function globally.
If this function is enabled, the first Report Message from the
listener will forward to the router ports while the subsequent
Report Message from the group will be suppressed to reduce the
MLD traffic in the network.
Router Port Time: Enter the glob
al router port aging time. If the router port does not
receive Query Message in the aging time, it will be aged.
Member Port Time:
Enter the global member port aging time. If the member port
does not receive Report Message in the aging time, it will be
aged.
Last Listener Query
Interval:
Enter the interval between the switch sends out MASQs.
Last Listener Query
Count:
Enter the number of MASQs that the switch sends before aging
out a multicast address when there is no MLD report response.
MLD Snooping Status
Description: Displays MLD snooping status.
Member: Displays the member of the corresponding status.
Note:
Configurations of the Router Port Time and Member Port Time in 9.2.3 VLAN Config override their
global configurations here.
To Next Page
Loading...
