Configuring DHCP Service DHCP Server Configuration
User Guide 445
Step 14 copy running-config startup-config
Save the settings in the configuration file.
The following example shows how to create a DHCP server pool with the parameters
shown in Table 2-1.
Table 2-1 Parameters for the DHCP Server Pool
Parameter Value
Pool Name pool 1
Network Address 192.168.1.0
Subnet Mask 255.255.255.0
Lease Time 180 minutes
Default Gateway 192.168.1.1
DNS Server 192.168.1.4
NetBIOS Server 192.168.1.19
NetBIOS Node Type B-node (Broadcast)
TFTP server 192.168.1.30
Domain Name com
Bootfile bootfile
Switch#configure
Switch(config)#ip dhcp server pool pool1
Switch(dhcp-config)#network 192.168.1.0 255.255.255.0
Switch(dhcp-config)#lease 180
Switch(dhcp-config)#default-gateway 192.168.1.1
Switch(dhcp-config)#dns-server 192.168.1.4
Switch(dhcp-config)#netbios-name-server 192.168.1.19
Switch(dhcp-config)#netbios-node-type b-node
Switch(dhcp-config)#next server 192.168.1.30
Switch(dhcp-config)#domain-name com
Switch(dhcp-config)#bootfile bootfile
To Next Page
Loading...
