Trace Engineering RC7 User Manual

ã 1999 Trace Engineering
RC7 & RC7GS Remote Controls
ii
3. Operation (continued)
RC7GS Setup Menu ..............................................14
Set Clock (RC7GS Only)
Select Genset
Generator Start
Generator Stop
Begin Gen Quiet and End Gen Quiet
Saving your Setup Choices .................................18
RC7 and RC7GS System Status Displays ..........19
AC Source Messages ...................................19
Waiting for AC
Genset Status:
Pending, Cranking and Genstart
Starter Cooldown and Gen Start
Gen Set Error Messages ..............................20
Gen Won’t Start
Gen Quiet Fault
Low AC Input V
Inverter Mode Messages ..................................20
Charger Mode Messages .................................23
Bulk Charging
Absorption Charging
Float Charging
Equalizing Charging
Inverter/Charger Error Messages....................25
Over Temperature
Overload
High Battery Voltage
Low Battery Voltage
DCLD Lockout Error
Charger Fault
Meters Display.......................................................28
Average Shunt Amps
Battery Voltage
Inverter/Charger Current
AC Output Voltage
AC Input Amps
Battery Temperature
Transformer Temperature
FET Temperature
Estimated Battery Capacity

Trace Engineering RC7 Specifications

General

Brand	Trace Engineering
Model	RC7
Category	Remote Control
Language	English