Trace Engineering RC7 User Manual

ã 1999 Trace Engineering
RC7 & RC7GS Remote Controls
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions that should be followed
during the installation and maintenance of this product.
To reduce the risk of electrical shock, and to ensure the safe installation and
operation of this product, the following safety symbols have been placed
throughout this manual to indicate dangerous conditions and important safety
instructions.
WARNING - A dangerous voltage or condition exists in this area.
Use extreme caution when performing these tasks.
CAUTION - This procedure is critical to the safe installation or
operation of the unit. Follow these instructions closely.
NOTE - This statement is important. Follow instructions closely.
· All electrical work must be done in accordance with local, national,
and/or international electrical codes.
· Before installing or using this device, read all instructions and cautionary
markings located in (or on) the manual, the controller, the batteries,
and the PV array.
· Do not expose this unit to rain, snow or liquids of any type. This
product is designed only for indoor mounting.
· To reduce the chance of short-circuits when installing or working with
the inverter, the batteries, or the PV array, use insulated tools.
· Remove all jewelry such as rings, bracelets, necklaces, etc., while
installing this system. This will greatly reduce the chance of accidental
exposure to live circuits.
· The inverter contains more than one live circuit (batteries, PV
array, generator, etc.). Power may be present at more than one source.
· This product contains no user-serviceable parts. Do not attempt to
repair this unit.
SAVE THESE INSTRUCTIONS
iv

Trace Engineering RC7 Specifications

General

Brand	Trace Engineering
Model	RC7
Category	Remote Control
Language	English