Trace Engineering RC7 User Manual

ã 1999 Trace Engineering
RC7 & RC7GS Remote Controls
3.0 OPERATION
36
Search Sense:
Default
Auto LBCO
OFF
Bat Capacity:
Auto
RC7 and RC7GS Setup Menu
Press and hold both menu item keys for 5 seconds
Search Sense:
About 5W load
Auto LBCO
ON
Bat Capacity:
125 A-hrs
Search Sense:
...10 W load
Bat Capacity:
250 A-hrs
Search Sense:
...40 W load
Bat Capacity:
375 A-hrs
Search Sense:
> 40 W load
Bat Capacity:
500 A-hrs
Bat Capacity:
1000 A-hrs
Battery Type:
GEL Cell
Charge Rate
100% of max
Battery Type:
Liquid Lead Acid
Bat Capacity:
90%
Battery Type:
AGM
Bat Capacity:
80%
Bat Capacity:
20%
Bat Capacity:
10%
Set Shore Power
30 Amps
Set Shore Power
25 Amps
Set Shore Power
20 Amps
Set Shore Power
5 Amps
RC7 Setup:
Last Key
LCD Contrast:
Max Contrast
RC7 Setup:
Power Saver
LCD Contrast:
87%
RC7 Setup:
Rolling Display
LCD Contrast:
62%
LCD Contrast:
Min Contrast
External Shunt:
None
External Shunt:
This Inverter
External Shunt:
Other Inverter
Fuelgauge Cutout:
9.5VDC=0%SOC
Fuelgauge Cutout:
10.3VDC=0%SOC
Fuelgauge Cutout:
11.7VDC=0%SOC
Fuelgauge Cutout:
11.8VDC=0%SOC
Generator Start:
Manual (Push ON)
Generator Start:
Auto at 40% SOC
Generator Start:
Auto at 60% SOC
Generator Start:
Auto at 11.0 VDC
Generator Start:
Auto at 12.2 VDC
Generator Stop:
Manual (Push OFF)
Generator Stop:
Auto at 90% SOC
Generator Stop:
Auto at 95% SOC
Generator Stop:
Auto at 99% SOC
Generator Stop:
Auto at Absorb
Generator Stop:
Auto at Float
Begin Gen Quiet
00:00
End Gen Quiet
00:00
Select Genset:
Onan QuietDiesel
Select Genset:
PowerTech 2-Wire
Select Genset:
PowerTech 3-Wire
Select Genset:
Other 80
Set Clk: 0-23:59
00:00
RC7GS only
Note: The SETTINGS arrow moves across the columns - the UP and DOWN
arrows scroll through the headings.
Set Shore Power
15 Amps
Set Shore Power
10 Amps

Trace Engineering RC7 Specifications

General

Brand	Trace Engineering
Model	RC7
Category	Remote Control
Language	English