14 CTV-SVU02A-EN
Stopping/Restarting Chiller Operation
You can start or stop the chiller from the AdaptiView display by using the Auto and Stop buttons.
The buttons are located in upper right (
Figure 1, p. 7).
Stopping the Chiller
You can stop the chiller in two ways:
• Normally, which involves stopping the various components sequentially in order to protect
them from damage
• Immediately, which shuts down all the components at once, and should be used only in an
emergency
To stop the chiller in either of these ways:
1. Touch the Stop button to initiate the chiller shutdown process. A confirmation screen appears
(Figure 4).
Figure 4. Stop the Chiller confirmation screen
To Next Page
Loading...
Need help?
General
