Trane AdaptiView User Manual

CTV-SVU02A-EN 53
Security Settings
Disabling/Enabling Security
The Tracer AdaptiView display gives you the ability to disable or enable the security feature that
allows a user to log in and log out.
To disable security, you must be logged in:
1. From the Settings screen, touch the Security button. The Security screen appears (Figure 33).
Note: If you are logged out, the Log in screen appears.
2. Touch the Disable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with only the Security button visible. The Log in/Log
out button is gone.
To enable security:
1. From the Settings screen, touch the Security button. The Security screen appears (Figure 33).
2. Touch the Enable button. The button becomes shaded.
3. Touch Save. The Settings screen appears with a Log out button, in addition to the Security
button.
Figure 33. Security screen

Trane AdaptiView Specifications

General

Brand	Trane
Model	AdaptiView
Category	Monitor
Language	English