36
SS-SVN016A-EN
Editing Equipment Configuration
Depending on how the split system condenser and air handler are paired, adjusting the equipment configuration may be required for proper
operation. To edit the equipment configuration:
1. On the home screen, select the tools icon
at the bottom of the screen to navigate to the
Settings screen.
Figure 23. Home screen
2. Select View Configuration.
Figure 24. View configuration screen
3. Select Edit.
Figure 25. Edit configuration screen
4. The equipment must be stopped to edit the
configuration. Press Proceed to stop the
equipment.
Figure 26. Stopping the equipment screen
5. On the Edit screen, scroll to the option that
needs to be edited. To edit an option, select
the green text.
Figure 27. Edit configuration screen
6. Select the desired option. Then select the
back arrow at the top of the page to go back
to the previous page.
Figure 28. Edit configuration screen
SSyymmbbiioo SSeerrvviiccee aanndd IInnssttaallllaattiioonn MMoobbiillee AApppplliiccaattiioonn
To Next Page
Loading...