Trane RTHD

RTHD-SVX01D-EN 97
TechView
TechView is the PC (laptop) based tool used for servicing Tracer CH530
Chillers. Technicians that make any chiller control modification or service any
diagnostic with Tracer CH530 must use a laptop running the software
application “TechView.” TechView is a Trane application developed to minimize
chiller downtime and aid the technicians' understanding of the chiller
operation and service requirements.
NOTE: Important: Performing any Tracer CH530 service functions should be
done only by a properly trained service technician. Please contact your local
Trane service agency for assistance with any service requirements.
TechView software is available via Trane.com.
(http://www.trane.com/commercial/software/tracerch530/)
This download site provides a user the TechView installation software and
CH530 main processor software that must be loaded onto their PC in order to
service a CH530 main processor. The TechView service tool is used to load
software into the Tracer CH530 main processor.