Trane Tracer UC600 User Manual

BAS-SVX45F-GB
Installation, Operation, and
Maintenance
Tracer
®
UC600 Programmable Controller
Ordering Number: BMUC600AAA0100011
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing
of heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and
training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags,
stickers, and labels that are attached to the equipment.

Trane Tracer UC600 Specifications

General

Type	Building Automation Controller
Communication Protocol	BACnet MS/TP
Protocols Supported	BACnet MS/TP
Input/Output Points	Configurable
Inputs/Outputs	Configurable
Display	LCD
Power Supply	24 VAC
Input Voltage	24 VAC/VDC
Communication Protocols	BACnet MS/TP
Storage Temperature	-40° to 185°F (-40° to 85°C)