TransCore encompass 4 - Chapter 2 Developing the Site Plan

Chapter3 Choosing, Installing, Removing Tags
This chapter describes the various tag types compatible with the Encompass® 4
Reader and the procedures for installing and removing compatible internal and
external tags.
Compatible Tag Types
The Encompass 4 Reader provides the capability to read the various TransCore eGo® Plus-type tags
employing Super eGo (SeGo) protocol and other American National Standards Institute (ANSI) ANS INCITS
256-2001-compliant tags. Depending on options ordered, the Encompass 4 Reader can read eGo Plus,
ATA-protocol, ISO-compliant tags, and Inter-Agency (IAG) tags. It can also read tags formatted to a wide
range of industry-standard proprietary formats, including SIA Wiegand 26-bit standard format.
TransCore tags oer security features to prevent data corruption, data alteration, and tag cloning. Tags
support factory locked data fields for Tag ID, customer, and user information as well as open data fields for
agency use.
Refer to “Appendix E Compatible Tag Information” on page E–1 for infomation about specific tag
models.
Windshield Sticker Tags
TransCore’s eGo® Plus windshield sticker tags are beam-powered, radio-frequency identification (RFID)
tags, ideal for applications that require low-cost and easy installation. These tags do not require batteries
or maintenance. The peel and stick design provides ease of installation on an interior windshield. Tags are
constructed from strong, flexible material that can withstand long-term exposure to the sun.
Windshield sticker tags are suitable for a wide variety of automatic vehicle identification (AVI) applications,
including electronic toll collection, airport/ground transportation management, parking access, and
security access.
Installation is semi-permanent and the tag cannot be reused once it is removed from the windshield.
Hard Case Tags
TransCore’s hard case RFID tags oer flexibility, durability, and versatility. Constructed of highly durable,
impact resistant, molded plastic, these tags are durable enough for use in commercial environments. Easy
installation and removal is assured by a choice of mounting options: 3M™ Dual Lock, hook-and-loop, or
suction cups. Double-sided tape strips are an available mounting option for semi-permanent installations.
Hard Case Tags are suitable for a wide variety of automatic vehicle identification (AVI) applications,
including electronic toll collection, airport/ground transportation management, parking access, and
security access. Features of these tags vary, depending on the model. Refer to “Appendix E Compatible
Tag Information” on page E–1 for information about specific tag types.
Many hardcase tags are powered by a lithium battery. Some cases have batteries that are replaceable
by the user, while others have long-lasting non-replaceable batteries when a maintenance free tag is
required.
Encompass 4 Reader System Guide
TransCore Proprietary.
3–20