Rail/Transportation/Container Tags
The AT Series tags are ideal for external mounting on vehicle chassis, intermodal containers, or any
environment that requires a durable, weatherproof tag.
The rugged weatherproof, sealed, UV-stabilized gray case can withstand harsher environments such as
railyards.
Many of the AT Series tags are beam-powered, requiring no internal battery, for an unlimited service life.
Exterior-Mounted Tags
Packaged in a water-resistant case, TransCore’s exterior mounted tags are ideal for applications that
require exterior-mounted, easily installed tags. Exterior tags feature rugged cases that are water, weather,
and impact resistant. They are beam-powered, eliminating the need for batteries or maintenance. They
are suitable for a wide variety of automatic vehicle identification (AVI) applications, including electronic toll
collection, airport/ground transportation management, parking access, and security access.
TransCore’s License Plate tags are designed to fit over a vehicle license plate and are typically mounted on
the vehicle using existing license plate brackets and hardware.
TransCore’s Mini External tag can be mounted on any flat or slightly curved glass, plastic, or metal surface
with two semi-permanent adhesive strips. Its compact size is ideal for applications requiring exterior
mounting and easy installation.
Hang Tags
Hang tags are designed to hang on a vehicle’s rear-view mirror. When a tag is not needed, it can be easily
removed and stored for later use.
Hang tags have the same features as eGo Plus Windshield Sticker tags. They are suitable for temporary
applications that require a robust, yet easily removable tag, such as electronic toll collection.
Windshield Sticker Tag General Installation Instructions
Required supplies
• eGo Plus Windshield Sticker Tag
• Commercial glass cleaner and paper towels
General instructions and guidelines
• You MUST correctly and permanently install the tag on the windshield before driving to the toll
plaza. Do not attach the tag to your visor or other temporary location.
• Do not wave the tag or hold it on the inside or outside of your vehicle as you approach the toll
plaza.
• If your vehicle has a metallized windshield, the tag should be mounted in the section that is not
metallized, usually near the rear-view mirror. Contact the dealership, manufacturer, or review the
vehicle user manual for proper placement.
Chapter 3 Choosing, Installing, Removing Tags
TransCore Proprietary
3–21
To Next Page
