Transition Networks SGPAT1013-105 - 4-Port Dual-Converter Mode

Transition Networks SGPAT10xx-x05 PoE+ Converter User Guide
33719 Rev. C https://www.transition.com Page 24 of 49
4-Port Dual-Converter Mode
Dual Converter mode on the 4-port model (SGPAT1040-305) is like having two independent converters. In Dual
Converter mode, SGPAT1040-305 Ports 4 and 2 make one converter, while Ports 3 and 1 make the other
converter.
In Dual Converter Mode:
 Ports 1 and 3 can communicate with each other.
 Ports 2 and 4 can communicate with each other.
 Ports 1 and 3 are isolated from ports 2 and 4.
Port
Forwards Port Traffic to Port
4 (SFP)
2
3 (SFP)
1
2 (RJ45)
4
1 (RJ45)
3
The ports are labeled from left to right PORT 4,3,2,1 as shown below.
4-Port Dual-Converter Mode Example