12
10.2016
WTAL - TNX65/42
Maintenance Instructions
Maintenance kits and spare parts
The parts lists needed for maintenance and repair work can be ordered from
the manufacturer's service quoting the 7-digit serial number on the rating plate.
The Article Nos. of the required spare parts can be found in the in the Spare
Parts List.
Screen display
The message block "MAINTENANCE WORK REQUIRED" appears on the
monitor upon expiry of each maintenance interval in order to make it easier for
the user to comply with the specified intervals. The required maintenance
interval can be read off in the line "Maintenance interval" (blue background)
after pressing the keys: Monitor - Supplement - Piece counter.
For example: MAINTENANCE INTERVAL 2 000 hours
The work required in each instance is described in the Maintenance
Instructions. The display can be cleared by pressing the keys: Delete
maintenance - Input in the maintenance menu when the maintenance work is
complete. The alarm on the monitor is cancelled at the same time.
To Next Page
Loading...