61
10.2016
WTAL - TNX65/42
Safety-related maintenance every 1, 2, 4 and 8 years
Annual maintenance of the automatic working area door
Check mechanical rail of automatic working area door
This maintenance work can only be carried out when the machine is
switched on.
The mechanical rail of the automatic working area door is a safety
element and subject to mandatory annual inspection by an expert
(safety regulation BGR 232 of the employers’ liability insurance association).
Inspection of the automatic working area door to ensure its safe
condition must be recorded in a written test log.
Faults and damage to the mechanical rail of the automatic working
area door must be remedied immediately.
G02
To Next Page
Loading...