15
10.2016
WTAL - TNX65/42
Maintenance Instructions
Fire protection device
Testing / servicing the fire protection device
Note the manufacturer's documentation with regard to servicing the
fire protection device.
It is advisable to conclude a maintenance agreement with the
manufacturer of the fire protection device for its maintenance.
A function test must be performed once per year by an expert authorized by
the manufacturer in writing.
On completion of maintenance work
Danger of being crushed by the control cabinet
During operation, the control cabinet must be moved right up to the
machine to avoid the risk of being crushed.
Whenever maintenance work is complete, the owner or operator of the
machine must check that the machine, including its guards and protective
devices, is in safe operating condition.
To Next Page
Loading...