47
10.2016
WTAL - TNX65/42
Maintenance work every 4 000 hours of operation
E
Maintenance work every 4 000 hours of operation
No. Where What Comments
01 see A, B, C, D • Carry out all the maintenance work listed under
A, B, C and D
02 Hydraulic system • Replace hydraulic fluid
03 Power clamping
mechanism
• Check concentricity of clamping cylinder
04 Top turrets • Clean drain opening
05 Control cabinet • Clean the interior of the control cabinet
• Check and retighten connections
To Next Page
Loading...