25
10.2016
WTAL - TNX65/42
Maintenance work every 200 hours of operation
Level switch
Pre-filter box with strainer
Chip conveyor
Avoid skin contact with the lubricoolant!
Use suitable skin care agents!
Check the chip conveyor for fouling around the level switch and clean it if
necessary
Risk of injury
Beware of injuries when reaching into the chain guide.
For this reason, the chip conveyor must be switched off before
removing metal chips/other dirt from the area behind the strainer
basket.
Note personal protective equipment.
Suitable aids must be used to remove the metal chips.
Note the corresponding manufacturer's documentation.
• Check the area behind the strainer basket for fouling and clean it if
necessary.
B02
To Next Page
Loading...