20
10.2016
WTAL - TNX65/42
Pre-filter box
Chip conveyor
Avoid skin contact with the lubricoolant!
Suitable skin protection must be used!
Risk of injury
Suitable aids must be used to remove the metal chips.
Note personal protective equipment.
Check the pre-filter box on the chip conveyor for accumulations of metal
chips and remove them if necessary
Risk of injury
Beware of injuries when reaching into the chain guide.
For this reason, the chip conveyor must be switched off before
removing metal chips from the pre-filter box.
Suitable aids must be used to remove the metal chips.
A03
Daily visual inspection
To Next Page
Loading...