© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-810DR
43
• Reset Button – Located on the side panel of your router, see “Product Hardware
Features” on page 5. Use this method if you are encountering difficulties with
accessing your router management page.
OR
• Router Management Page
1. Log into your router management page (see “Access your router management page
”
on page 15).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
4. Under Load Factory Default, click Load Default. When prompted to confirm this
action, click OK.
Router Default Settings
Administrator User Name admin
Administrator Password Please refer sticker or device label
Router IP Address 192.168.10.1
Router Subnet Mask 255.255.255.0
DHCP Server IP Range 192.168.10.101-192.168.199
Wireless 2.4GHz Enabled
Wireless 2.4GHz Encryption Please refer sticker or device label
Wireless 5Ghz Enabled
Wireless 5GHz Encryption Please refer sticker or device label
Backup and restore your router configuration settings
Advanced > Administrator > Settings Management
You may have added many customized settings to your router and in the case that you
need to reset your router to default, all your customized settings would be lost and
would require you to manually reconfigure all of your router settings instead of simply
restoring from a backed up router configuration file.
To backup your router configuration:
1. Log into your router management page (see “Access your router management page
”
on page 15).
2. Click on the Advanced tab.
3. Click on the Administrator section and click on Settings Management.
To Next Page
