© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-814DAP
25
AP2 Configuration
1. Log into your access point management page (see “
Access your access point management page” on page 9).
2. Click on Wireless, click on Basic.
3. Click the Mode drop-down list and select one of following WDS options.
• WDS: Select this option to establish wireless bridging only without broadcasting your wireless network name for client devices to connect. Please refer to the section
Wireless Bridge
(WDS) Mode page 17 for details on this mode.
• WDS+AP (Recommended): Select this option to establish wireless bridging and broadcast your wireless network name for client devices to connect simultaneously. See page 23 for
details. Please refer to the section
Wireless Bridge (WDS) with Access Point (AP) Mode on page 19 for details on this mode.
4. Review the Bridge Setting section and press Save Settings.
To Next Page
Loading...
Need help?
General
