© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-814DAP
29
6. Click Finish and wait for the device to apply the settings.
7. To verify the access point has successfully copied the settings and connected to your It may take up to 1 minute for your device to verify and display the connection status.
Link Status
Status > Link Status
1. Log into your access point management page (see “
Access your access point management page” on page 8).
2. Click the Status and Link Status to view the connection status of your access point in client mode.
Note: If the Link Status does not display any information after 1 min, please re-attempt the procedure.
• Connected Time: Time duration of how long the access point has been connected.
• MAC Address: MAC address of the access point is connected
To Next Page
Loading...
