© Copyright 2015 TRENDnet. All Rights Reserved.
Change your router login password
Maintenance > Password
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Management and Access Controls and click on Account Password.
3. Select the user name to apply changes to. In the Current Password field, enter the
current password. New Password field, enter the new password and in the Confirm
field, retype the new password again to confirm.
4. Click Apply at the bottom of the page to save the changes.
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of
the default password..
Set your router date and time
Setup > Time and Date
There are two ways to set the router’s date and time. NTP (Network Time Protocol) is
based on time servers. You can also manually set the router’s date and time.
Note: It is important that the time is configured correctly before setting any schedules.
Oour router management page http://192.168.10.1 is accessed through the use of your
Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and will be
referenced frequently in this User’s Guide.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Setup, and click on Time and Date.
3. Next to Time Zone, click the drop-down list to select your time zone.
NTP
1. Review the settings below and click Apply to save settings.
Automatically synchronize with Internet time server: Check option to enable NTP
feature
Server IP: Enter the NTP server IP address or domain to use.
You may also configure Daylight Saving feature.
To Next Page
Loading...
Need help?
General
