© Copyright 2015 TRENDnet. All Rights Reserved.
Setup IPv6 on your router
Advanced > IPv6
IPv6 (Internet Protocol Version 6) was developed to be the successor protocol to well
known and widely used protocol IPv4 (Internet Protocol Version 4) for network
addressing. The new addressing protocol is designed to minimize processing overhead
by routers, significantly increase the available IP address space, provide integrated
security, and open the possibility of more extensions and options. ISP have already
transition their networks to accommodate IPv6 and are starting to offer IPv6 services.
Note: The router offers native IPv6 as well as IPv4 to IPv6 transitional connection
types.
IPv6 WAN
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, and click on IPv6 WAN.
4. Select your IPv6 WAN type and complete the fields required by your ISP. Click Apply
to save settings.
Note: If you are unsure which Internet connection type you are using, please contact
your ISP (Internet Service Provider).
IPv6 LAN
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, and click on IPv6 LAN.
4. Select your IPv6 WAN Interface on the pull down menu and click Apply to save
settings.
Configure ADSL settings
Advanced > ADSL
This page allows you to select ADSL modulations, capabilities, and other options.
Consult your ISP to determine the appropriate settings.
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, and click on ADSL.
4. Select the fields required by your ISP. Click Apply to save settings.
To Next Page
Loading...
Need help?
General
