© Copyright 2015 TRENDnet. All Rights Reserved.
11. Verify your settings, and click Finish to completer the setup wizard.
Note: If you cannot access the Internet, please verify your hardware connections and
LED status and re-run the Setup Wizard to verify you have applied the correct settings.
12. For added security, the router is pre-encrypted with its own unique wireless network
security key. You can find the unique network security key and pre-assigned network
name (SSID) on a sticker on the front of the router and on a label on the bottom of the
router. If you would like to change the wireless settings, continue to the next page to
launch the wireless setup wizard.
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your
network by using Network cables. Connect them to one of the available LAN ports
labeled 1,2,3,4 on your modem router. Check the status of the LED indicators (1, 2, 3, or
4) on the front panel of your router to ensure the physical cable connection from your
computer or device.
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address settings
automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server
address settings automatically.
To Next Page
Loading...
Need help?
General
