© Copyright 2015 TRENDnet. All Rights Reserved.
Enable Mild Proxy: Select to enable
WAN Connection: Select the interface to set
Query Interval: Enter IGMP query interval
Query Response Interval: Enter response interval
Last Member Query Interval: Enter last member query interval
Enable Mild Snooping: Select to enable
Identify your network on the Internet
Since most ISPs constantly change your home IP address, providing access to devices on
your home or small office Local Area Network (such as IP Cameras) from the Internet
requires setting up a Dynamic DNS service and entering the parameters into this
management area. Dynamic DNS services allow your router to confirm its location to the
given Dynamic DNS service, thereby providing the Dynamic DNS service with the ability
to provide a virtual fixed IP address for your network. This means that even though your
ISP is always changing your IP address, the Dynamic DNS service will be able to identify
your network using a fixed address—one that can be used to view home IP Camera and
other devices on your local area network.
Note: First, you will need to sign up for one of the DDNS service providers listed in
the Server Address drop-down list.
1. Sign up for one of the DDNS available service providers list under Server Address.
(e.g. dyndns.com, no-ip.com, etc.)
2. Log into your router management page (see “Access your router management page”
on page 23).
3. Click on Advanced and click on Dynamic DNS.
4. Click Add to add a new entry.
5. In the DDNS provider drop-down list, select the provider you selected, and enter your
information in the fields.
Host Name: Personal URL provided to you by your Dynamic DNS service provider
(e.g. www.trendnet.dyndns.biz)
Interface: Select the interface to apply with the account.
User Name / E-mail: The user name needed to log in to your Dynamic DNS service
account
Password/Key: This is the password to gain access to Dynamic DNS service (NOT
your router or wireless network password) for which you have signed up to.
6. To save changes, click Apply.
Allow remote access to your router management page
Maintenance > Remote Management
You may want to make changes to your router from a remote location such at your
office or another location while away from your home.
1. Log into your router management page (see “Access your router management page”
on page 22).
2. Click on Management, and click on Remote Access Control.
3. Under the Remote Access Control section select the WAN connection type that will
be used.
To Next Page
Loading...
Need help?
General
