TRENDnet TEW-816DRM User Manual

© Copyright 2015 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-816DRM
33
IGMP
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, click on Multicast and select IGMP.
3. Under IGMP option select which IGMP to activate.
IGMP Proxy
 WAN Interface: Select the interface to set
 IGMP Version: Select the IGMP version
 Enable IGMP Proxy: Select to enable
 LAN Connection: Select the LAN interface
 Enable Fast Leave: Select option to enable fast leave feature
 Query Interval: Enter IGMP query interval
 Query Response Interval: Enter response interval
 Group Query Interval: Enter last member query interval
 Group Query Response Interval: Enter response query interval
 Group Query Count: Enter the query count
 Last Member Query Interval: Enter last member query interval
 Last Member Query Count: Enter last member query count
IGMP Snooping
 Enabled: Select to enable
 Last Member Query Interval: Enter last member query interval
 Host Timeout: Enter the host timeout period
 Mrouter Timeout: Enter the timeout period
 Leave Timeout: Enter the leave timeout period
 Max Groups: Enter the maximum group
MLD
1. Log into your router management page (see “Access your router management page”
on page 23).
2. Click on Advanced, click on Multicast and select IGMP.
3. Review the settings below and click Apply to save changes.
MLD Proxy /Snooping

TRENDnet TEW-816DRM Specifications

General

Brand	TRENDnet
Model	TEW-816DRM
Category	Network Router
Language	English