© Copyright 2013 TRENDnet. All Rights Reserved.
Front View
Power LED: This LED indicator is blinks green when properly connected to a power
supply. When the device is malfunctioned LED indicator will be red.
Internet LED: This LED indicator is blinking green when the ADSL status of the
modem router is ready to establish connection to your ISP. The LED indicator will
turn solid green when the modem router has been properly configured with the
settings provided by your ISP and successful ADSL connection has been made to
your ISP. This LED indicator will be blink while data is transmitted or received
through the ADSL port of your modem router.
WAN LED: This LED Indicator is solid green with valid internet connection. The LD
indicator blinks green during data transmission. If the indicator is red, this indicates
invalid internet connection.
LAN 1-4 (Link/Activity) LEDs – These LED indicators are solid green when the LAN
ports are successfully connected to your wired network devices (which are turned
on). These LED indicators will blink green while data is transmitted or received
through your modem router’s LAN ports.
2.4GHz Wireless LED: This LED indicator is solid green when the wireless is “On”
and functioning properly on your modem router. This LED indicator will be blinking
while data is transmitted or received by your wireless clients or wireless network
devices connected to your modem router. This LED indicator will be off when the
wireless functionality of your modem router is disabled.
5GHz Wireless LED: This LED indicator is solid green when the wireless is “On” and
functioning properly on your modem router. This LED indicator will be blinking
while data is transmitted or received by your wireless clients or wireless network
devices connected to your modem router. This LED indicator will be off when the
wireless functionality of your modem router is disabled.
WPS LED: This LED indicator blinks green when WPS is activated. The LED will stop
blinking and remain solid when WPS is completed. When the indicator blinks red it
indicates there was no WPS device connected.
USB1/2: This LED indicator blinks green when a device is connected to the USB port.
To Next Page
Loading...
Need help?
General
