© Copyright 2016 TRENDnet. All Rights Reserved.
Web Configuration
Basic Settings > Port Mirroring
Select Enable to turn on port mirroring or select Disable to turn it
off.
Select the port which connects to a network traffic analyzer.
Settings in this field apply to all ports.
Use this field only if you want to make some settings the same
for all ports.
Use this field first to set the common settings and then make
adjustments on a port-by-port basis.
This field displays the number of a port.
Select Ingress, Egress or Both to only copy the ingress (incoming),
egress (outgoing) or both (incoming and outgoing) traffic from the
specified source ports to the monitor port. Select Disable to not
copy any traffic from the specified source ports to the monitor
port.
Click Apply to take effect the settings.
Click Refresh to begin configuring this screen afresh.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
