“LIVELINK INSTALL” APP / WHAT IS A USE CASE? / PUBLIC USE CASES Page 22 / 77
Use Case “Conference Room”
In the Use Case “Conference Room”, the luminaire groups “Meeting”,
“Presentation”, and “Additional” are applied. In addition, there is one
sensor that is responsible for daylight-dependent light control as well
as presence detection.
Presetting of the luminaire groups
Group of luminaires Function
Meeting Presence detection
Daylight-dependent control
Presentation Presence detection
Daylight-dependent control
Additional
e. g. for accentuating
lighting
Presence detection
Presets of the scenes
Scene Function
Automatic • 10 minutes switch-off delay
for all groups, fully automatic operation
• Daylight-dependent control active
Projection • Constant dimming levels
for the following groups:
• Meeting 20%
• Additional 20 %
• Presentation 0 %
• 10 minutes switch-off delay
Lecture • Constant dimming levels
for the following groups:
• Meeting 50%
• Additional 20 %
• Presentation 100%
• 10 minutes switch-off delay
Service
• Constant dimming level for all groups at 100 %
• 10 minutes switch-off delay
Night lighting • Constant dimming level
for all groups at 20 %
• no automatic switch-off
Off • All groups off
Work
Additional Meeting
S1
Additional
Work 3
Work 1
Work 4
Work 2
S1
S3
S2
S4
Additional
Meeting PresentationS1
Traffic route
Work 1 Work 3Work 2
SV1
SA1
SV2
SA2
SV3
SA3
Traffic route 1
Traffic route 2
Work 1
Work 4
Work 3
Work 6
Work 2
Work 5
SV1
SV4
SA1
SA4
SV2
SV5
SA2
SA5
SV3
SV6
SA3
SA6
Corridor (+ Centre)
Window
Board
S1
S2
HallS1 S2
Accent
Shop Window
Cash Register
Shop
S1
S2 S3
Bed 3
Bed 2
Bed 1
Table
Room
S1
S2
Bathroom
Corridor
S1
S2 S3
G3
G6
G9
G2
G5
G8
G1
G4
G7
S1
S4
S7
S2
S5
S8
S3
S6
S9