Trilux LiveLink User Manual

“LIVELINK INSTALL” APP / ROOM ADMINISTRATION / ROOM SETUP: ASSIGNMENT Page 42 / 77
Assigning sensors
The assignment is performed analogously to the
luminaire assignment. In this, the control lamp of
the sensors serves for identification.
Testing the sensor
Subsequent to a long tap on a positioned sensor,
different functions can be called up.
The function “Testing the sensor” shows detected
movements. This way, the function of the sensor
and its detection range can be tested.
If a Dual HF sensor is utilised, the detection range
can, furthermore, be adjusted here.

Trilux LiveLink Specifications

General

Type	Control Unit
Input Voltage	230V AC
Frequency	50/60 Hz
Protection Rating	IP20
Communication Protocols	DALI
Mounting Options	DIN rail