Trilux LiveLink User Manual

“LIVELINK INSTALL” APP / ROOM ADMINISTRATION / ROOM SETUP: ASSIGNMENT Page 43 / 77
Remove sensor from position
With this function, a sensor can be removed from
the position. It is then available again in the bottom
area of the screen for a renewed assignment.
Push-buttons
The push-buttons are set up only in the next
steps. Shown are both the connected push-button
couplers as well as the push-button on the control
device.

Trilux LiveLink Specifications

General

Type	Control Unit
Input Voltage	230V AC
Frequency	50/60 Hz
Protection Rating	IP20
Communication Protocols	DALI
Mounting Options	DIN rail