“LIVELINK INSTALL” APP / ROOM ADMINISTRATION / ROOM SETUP: OPTION “SETTING UP SCENES” Page 57 / 77
Setting up constant light control
In case of constant light control, the sensor is
continuously measuring the brightness in the room.
The automatic control adjusted the brightness of the
illumination in order to compensate for the changes
of the exterior light. This way, it ensures a constant
brightness at the highest efficiency.
Subsequent to selecting constant light control, the
desired brightness of the room is set via the control
wheel and stored as reference value.
Constant light control: In the calibration of the
light control, the following notes must be taken
into consideration:
• The calibration of the illuminance should be per-
formed with as little daylight as possible.
• Sources of interference and the casting of shad-
ows on the area to be calibrated must be avoided.
(See chapter “Sensor placement”)
To Next Page
Loading...
Need help?
General