Triple E Topaz - 6.16 Landing Gear

6-11
TOPAZ
6.9 DISCHARGE VALVES
1. Discharge Fitting:
This fitting carries the discharge from the
grey and black water tanks. Connect the
discharge line to the fitting and route into
an approved sanitary disposal system.
Route the discharge hose to eliminate any
low spots in the hose when discharging.
Install dust cap when the discharge hose
is removed.
2. Open Black Tank First:
a. Black Water Tank Valve:
This is the discharge valve for the
black water tank. Pull out to open
valve and push in to close. Always
empty the black water tank first and
use the grey water tank to rinse out
any black water residue left inside the
sewer hose
Fig. 6-13 DISCHARGE VALVES
(Typical but varies by model)
b. Grey Water Tank Valve:
This is the discharge valve for the
grey water tank. Pull out to open
valve and push in to close. Always
empty the black water tank first and
use the grey water tank to rinse out
any black water residue left inside the
sewer hose
A
B
IMPORTANT
Holding tanks should be dumped before
travelling to eliminate unnecessary
weight while driving.