11-4
11.1.4 WATER PUMP FILTER
Before water can enter the various outlets in your
trailer it has to flow through a water filter. This filter
is mounted on the water pump.
Check the water filter periodically and clean or
replace it at least annually to assure a clean supply
of water.
TOPAZ
11.1.5 WATER SYSTEM ACCESS
The water system is designed with 2 fittings on
the side of the trailer. Use the fresh water fill to fill
the fresh water tank and the city water fitting to
attach a water hose for using city water to supply
and pressurize the system.
11.1.6
WATER PUMP INITIAL START-UP
1. Make sure all drain valves are closed including
the water heater drain plug.
2. Turn water pump switch off.
3. Fill water tank.
4. Open faucets, both hot and cold.
5. Turn pump switch on.
6. Close each faucet (cold and hot) as soon as
water flows steadily.
7. Check to see that pump stops after all faucets
are closed.
8. Pump is now ready for automatic operation. It
will start whenever a faucet is opened.
9. Refill fresh water tank.
Fig. 11-5 ACCESS FITTINGS
CITY
FRESH
Fig. 11-4 WATER PUMP & WATER FILTER
To Next Page
Loading...
