Triumph Sprint GT User Manual

33
General Information
Note:
• Do not leave the steering lock in
the P position for long periods of
time as this will cause the battery
to discharge.
Brake and Clutch Lever
Adjusters
1. A d j u s t e r w h e e l
2. Triangular mark
An adjuster is fitted to both the front brake
and clutch levers. The adjusters allow the
distance from the handlebar to the levers to
be changed to one of four positions, to suit
the span of the operator's hands.
To adjust the levers, push each lever forward
and turn the adjuster wheel to align one of
the numbered positions with the triangular
mark on the lever holder.
The distance from the handlebar grip to the
released lever is shortest when set to number
four and longest when set to number one.
Warning
For reasons of security and safety, always
move the ignition switch to the OFF
position and remove the key when leaving
the motorcycle unattended.
Any unauthorized use of the motorcycle
may cause injury to the rider, other road
users and pedestrians and may also cause
damage to the motorcycle.
Warning
With the key in the LOCK or P position the
steering will become locked.
Never turn the key to the LOCK or P
positions while the motorcycle is moving as
this will cause the steering to lock. Locked
steering will cause loss of motorcycle
control and an accident.

Triumph Sprint GT Specifications

General

Engine Type	Liquid-cooled, 12 valve, DOHC, in-line 3-cylinder
Displacement	1050 cc
Bore x Stroke	79 x 71.4 mm
Compression Ratio	12.0:1
Fuel System	Multipoint sequential electronic fuel injection
Final Drive	X ring chain
Clutch	Wet, multi-plate
Gearbox	6-speed
Front Tyre	120/70 ZR17
Rear Tyre	180/55 ZR17
Fuel Tank Capacity	20 litres
Max Power	130 PS (95.6 kW) @ 9, 200 rpm
Max Torque	108 Nm @ 6, 300 rpm
Exhaust	Stainless steel 3 into 1
Frame	Aluminium beam
Front Suspension	43mm
Rear Suspension	Monoshock with adjustable preload and rebound damping
Front Brakes	Twin 320 mm floating discs, Nissin 4-piston calipers
Rear Brakes	Single 255mm disc, Nissin 2-piston caliper
Seat Height	815mm
Ignition	Digital inductive type
Swingarm	Single-sided, aluminium alloy
Wheelbase	1, 537 mm